Plumbers Perth-wide carry out routine maintenance checks to ensure everything is in order. This can help prevent most issues including leaks, blocked drains and pipes or faulty valves and dysfunctional hot water systems. Early leak detection might prevent major problems such as flooding and property damage. It is highly advisable to hire professional plumbers to perform these thorough check-ups. They will be able to spot irregularities before they cause any harm and suggest repairs, replacements or renovations if necessary. Here is the ultimate checklist recommended by plumbing Perth specialists. 

1 – Looking for Active Leaks

If you spot mould, puddles or wet spots on your walls or ceilings, there is a great chance that there is a hidden leak that has been there for a while. Professional plumbers can detect active leaks fast and recommend the best possible solution to this problem.

2 – Hot Water System Maintenance

If you want to carry out a proper hot water system maintenance check, you need to call a professional plumber. Perth specialists can check the water temperature, detect leaks, test safety valves or find if there are signs of corrosion or mineral build-up. They might recommend changing the thermostat, replacing valves or cleaning the tank. 

3 – Checking the Drains

You also get a professional to inspect your drains. If they are blocked, they might obstruct the water flow, and you might need to get them unclogged. A camera inspection will show if there are blockages that need to be dealt with.

4 – Looking for Signs of Corrosion

If there are signs of corrosion, you need to replace the pipes. They are often not easily detectable, and it might be too late when you start noticing the discolouration of water. Professional plumbers can check whether there is a presence of limescale in water faucets, visible pipes and shower heads.

5 – Testing Water Pressure

Your plumber should also check whether the water pressure is normal. Extremely low pressure is going to obstruct your everyday life, but high pressure can be dangerous because it can damage your pipes and increase your water waste. Keep in mind that the pressure should be between 40 and 80 psi. 

6 – Inspecting Valves

Faulty or loose valves can cause major problems, so you need a plumber to check them from time to time. You need to make sure that all the shutoff and safety valves around your house are in order. After testing them, your plumber might adjust or replace some of them if necessary.

7 – Backflow Testing

Both commercial and residential properties have backflow protection devices, and they need to be inspected regularly. If they fail to prevent the backward flow, it may result in contamination of clean water with toxins and chemicals. It is recommended to perform this check once per year.

Preventative maintenance is especially important if you want to make sure your plumbing runs smoothly. Repairs and replacements can cost a lot more, especially if you leave issues unattended until they escalate and create damage. It is better to be safe than sorry, so call your plumbing service to schedule a thorough check-up once a year.